EBC Brakes Review – Redstuff Ceramic – 3000 Series – For Highly Tuned Cars and Fast Street
As EBC’s flagship street brake pad material for prestige and faster cars above 200BHP the 09 version on EBC Redstuff sets new standards in brake performance. Redstuff has always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad “Pick up” or disc scoring and reduced dust even further.
Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early Redstuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.
Redstuff however as a harder compound does take longer to fully bed in to achieve its highest levels of performance (can be up to 1500 miles/2500 Kms urban use) during which time the odd “Chirp” of brake noise may be heard when starting from cold in damp and cold conditions at walking pace speed. One press of the pedal to clear the rotor of any dampness and this disappears to leave EBC Redstuff a brake pad that inspires confidence in all cars. The motto is be patient give the pads a full chance to bed down.
The Complaint
To Whom It May Concern:
I purchased a set of EBC brakes from Summit Racing. My husband called Summit when they had 180 miles on them (exceeding the mileage the instructions indicated for the break in period) about them continuing to squeal like the worn out pads we bought the EBC’s to replace. We were instructed to drive more than 200 miles and call back. We went to vacation at the beach and put another 1000 miles on the brakes and they continue to squeal. When he contacted EBC again, they instructed him to send this email to you as it sounded as if the brakes were defective.
Please contact me as I would like to return the brakes. I can not afford to pay in excess of $200 to continue to have a squealing brakes.
Thank you in advance,
Misty Davis
The Solution
OK Misty, let me give you some news…..
We have been making changes to Red all spring, due to its hardness Red took the longest time of any of our compounds to bed in, up to 1500 miles.
People just wont wait that long.
The latest material is called DM 2026, I bedded this in on my :Lexus GS 300 in 200 miles and it is flawless.
I am making you both front and rear sets in this and will have them you in 10 days, I just need an address and then would really appreciate your feedback
The parts are DP 31764C and DP 31788C
The Conclusion – Happy Customer!
I apologize for not getting back in touch with you sooner regarding the new brakes that you sent. They are SO much better than the previous set. The break in period was about 500 miles. In addition to the reduced squeaking noise during the break in period, they stop the car MUCH better. Again, I apologize for the delayed feedback but I really appreciate the new set of brakes. I am very pleased with the purchase.
Misty Davis
Visit our website to read more great reviews!
Click logo below:
If you enjoyed this post, please consider to leave a comment or subscribe to the feed and get future articles delivered to your feed reader.
I have a 1999 F-250 Super duty truck, 7.3 Power Strock Diesel, with all the extra’s, exhaust brake, reworked turbo,
Chip. and gear vender transmission behind ford’s automatic
four speed overdrive. I pull a 35 foot 5th. wheel trailer
and I’m not real happy with the stoping power. I have
ceramic brake pads on the front. I live in No. Calif. and
I am in and out of the Sierra Mountains with this unit. The
Trailer weighs about 14,000 lbs. fully loaded. Can you
sugest better breaks. Thanks for you thoughts Ed Vollmar